Pink Rose Vase Spiral Edge Stacker 7x5in Card Front
I have designed this card front in my spiral edge stacker concept to create a spiral edge
around the card front.
This is a 7inch x 5inch square card front so it will fit the A5 cards if you add a backing paper.
Simply cut out the base image and attach to your card or project flat, then cut out the edges starting at number 1.
Glue your edges using a 3D glue or foam pads, and attach to the base image going around the outside, each edge
overlaps the last, this will build up the outside edge into a 3D decoupage effect. As you
glue the edges you are going around the card in a spiral effect.
I have also designed a matching cut and fold card in the 7x5inch size.
Photographs from the Community
The image was printed out onto 120grm paper. A toning pink background was trimmed to just a litte larger than the image and matted to a 5 x 7 card with double sided sticky tape.
The main image was then matted, again, with double sided sticky tape. 2mm foam pads were used for the layers.
Another piece of pink backing was used for the gold peel-off birthday greeting and fixed with 2mm foam pads. A very easy design to put together.