Black Carnations 1 Lace Bracket Wrap Card
I have designed this bracket shaped wrap card
for using as a quick and easy cut and fold card or
to be used with the spiral edge stackers, both wavy
and straight edge. If you cut and fold the card for a simple
look, or using the matching card front, build the
picture into a 3D front. I have included a ribbon
strip to match, to make a bow for the flaps. If you
feel like being advanced with the card, print it
twice and use the flaps on the outer side of the card.
This card measure 6inch square and the centre fits for
the 5inch square fronts I have designed already.
There is one bracket wrap card for all of the spiral edge
stackers and i will add them all in time.
Photographs from the Community
I printed out the main image first on white pearlescent 300gsm card. I then turned it over and printed out another design on the back before cutting it out (you can see this in the photo at the bottom).
I then printed the main design again on 190gsm photo paper.
I cut it all out and separated the centre piece from the sides and mounted them on top of the card which gave it stability.
I used foam mounting tape for this. I then added some gold glitter to the pearls and some nice tassels for the side with a brad.
On the back I made a matching stand which was attached to the back of the card as I found the weight made it want to tip forward.
This worked beautifully. You can see this on the picture underneath. It is quite an unusual card and I enjoyed making it.