Lovely Horse in a Frame with Pyramids
Lovely Horse in a frame with Pyramids, just cut out and layer the pieces, add the tags with your own emb makes a lovely card
Photographs from the Community
I printed out the sheet on super smooth decupage white card and cut out all the elements.
I actually made two cards from this sheet, one a simple card using just the framed bottom layer as a topper, together with one of the greetings plates stuck onto a light green card (flat to easily go through the post).
For this card I took a plain white card and cut 1cm off the front right side.
I took a sheet of iridescent brown/bronze paper and cut three pieces from it, one slightly larger than the bottom, frameless, horse picture, one slightly larger than the greetings banner, and one 2cm wide strip to fit inside the right side of the card.
The pieces were trimmed with a fancy edged scisors, including what was to be the inside edge of the side strip.
I used double sided tape to fix the strip inside the right edge, and also the mat that is underneath the image.
The bottom layer was also stuck down to the mat with double sided tape. All the rest of the layers were put on with 2mm depth double sided foam strips.
. For this card I took a plain white card and cut 1cm off the front right side. I took a sheet of iridescent brown/bronze paper and cut three pieces from it, one slightly larger than the bottom, frameless, horse picture, one slightly larger than the greetings banner, and one 2cm wide strip to fit inside the right side of the card. The pieces were trimmed with a fancy edged scisors, including what was to be the inside edge of the side strip. I used double sided tape to fix the strip inside the right edge, and also the mat that is underneath the image. The bottom layer was also stuck down to the mat with double sided tape. All the rest of the layers were put on with 2mm depth double sided foam strips.){kind=link}