Snowy Night - Aperture Layer Card Mini Kit
Layered front card with a snow scene trimmed with Christmas flowers. The kit has 3 sheets which include the 7" x 7" (approx.) card front, matting layer, frame layer, decoupage, sentiments and insert.
There are 2 sentiments - Merry Christmas and Season's Greetings - or a blank tag for your own message.
Photographs from the Community
Printed this design onto photo paper and cut out all the elements, I placed the design base onto the front of a 8x8 scalloped card, then added a purple glittery wavy border all round the edges, to finish my card I made up the design using 3mm sticky pads, this is a beautiful design when made up, very effective
![](http://www.pinterest.com/pin/create/button/?url=https://www.craftsuprint.com/card-making/mini-kits/mini-kits-christmas/snowy-night-aperture-layer-card-mini-kit.cfm&media=https://s3.amazonaws.com/finished-cards/carol-lodge/photo793763.jpg&description=Snowy Night Aperture Layer Card Mini Kit%20on%20Craftsuprint%20created%20by%20CAROL LODGE%20-%20Printed all onto 200gsm photo card and cut out all elements. Attached main image to 8"x 8" card and trimmed card to fit design. Attached inner using dst. Decoupaged using 2mm sticky pads to give good depth. A most beautiful card with gorgeous colours.){kind=link}
Printed all onto 200gsm photo card and cut out all elements. Attached main image to 8"x 8" card and trimmed card to fit design. Attached inner using dst. Decoupaged using 2mm sticky pads to give good depth. A most beautiful card with gorgeous colours.
I printed out the sheets on 230gm glossy paper and the insert on paper. I cut out all the pieces and I used double sided tape to stick the card base to a 7 x 7 greeting card blank and the insert inside the card.
Using 2mm sticky foam pads I added the decoupage base and frame to the picture followed by the decoupage pieces matching the picture up whilst going along to make this stunning easy to assemble card.
Printed on glossy paper and original picture pasted on cardboard and cut out the parts and attached with 3D kit and finished with stickers