Set 23 Random Tile Papers
This is a set of 12 x A4 backing papers saved at 300 dpi. The papers are designed to co-ordinate with each other. Every paper is patterned, some with a bold pattern, some with a very subtle pattern.
I will allow PU/CU/CU4CU use on these papers but if you use them for commercial use please give me credit. Thank you.
Photographs from the Community
I cut a piece of black card to fit an 8 x 8 scallop edge card leaving a narrow border.
I then printed Paper 6 and cut two strips. Using Joanna Sheen Clarissa Lace Edger Die I cut two images into the strips of backing paper.
I trimmed them so that one edge was free and placed them onto the black card using d/s tape and wet glue.
I cut a strip of silver mirri card and placed this across the middle. Using Tattered Lace Sentiment Dies, I cut out Happy Birthday in black and placed this onto the silver mirri. I then added a black bow with white spots and some black gems into the four corners.
I attached this topper to the main card using d.s tape. To finish the card I printed Paper 6 again, cut a piece to fit the inside and used a scallop edge die to cut an aperture.
I placed this inside as the insert.
The white from the card that shows through the aperture can be used by my customer to write their own message.