Kickin' It Bow Window Card Kit
A great card to make for the men. Very easy to make and full instructions are included. The card had a 'Bow Window' front which lies flat to go into the matching envelope at the pull of a tab. Push the tab and the bow window effect is displayed.
There are plenty of sentiments to choose from and an additional co-ordinating backing paper.
Please have a look at my other kits in this range.
Photographs from the Community
I printed the design onto good quality 255gsm photographic paper and the backing paper and insert onto 160gsm paper and cut these out.
I scored and folded the design as instructed. I assembled the pyramid using thin foam tape.
I cut out the aperture as instructed and attached acetate using strong double side tape. This forms the window. I cut the slits above and below the design on the front of the card. I placed some strong double sided tape to the top tab of the window and threaded this through the top slit securing at the back.
The bottom tab is not secured in this manner as it has to be removed from the slit for posting.
I attached the backing paper to the inside of the card and then the insert using double sided tape. I printed the envelope onto 160gsm paper and cut it out. I assembled the envelope using strong double sided tape. I added the greeting using thin foam tape.
I printed all the bits onto 160gsm photo paper and stuck onto 200gsm card except the envelope which I just printed onto 160gsm paper.
I stuck all the decoupage pieces with 3d foam squares and used double sided tape to stick the acetate to the card.
I printed the insert onto normal paper and stuck it inside the card with a strip of double sided tape down the centre of the card.